Everything BETA 'Updating database'

[Debugger]

The latest beta version Version 1.4.1.984 (x64) does not start correctly. I see 'Updating database' all the time
Version Version 1.4.1.969 (x64) (x64) - shows the same thing, but the results are much faster ...

[void]

The updating database code hasn't changed from 969 to 984.

Check you are indexing the same files with the same indexing settings (Tools -> Options -> Indexes).

Everything 984 might be getting stuck processing a USN Journal change? -Does the debug console show Everything 984 processing any changes when "Updating database" is shown in the status bar?

• In Everything 984, when Everything shows "Updating database" in the statusbar, type in the following search and press ENTER
  /debug
• This will show the debug console.
• Do you see Everything processing changes in Cyan color?

To close the debug console:

• In Everything, type in the following search and press ENTER
  /debug

Please try deleting your Everything.db before running Everything 984 to force a fresh rebuild.

[void]

Please make sure Debug logging is disabled.

• In Everything, type in the following search and press ENTER:
  /debug_log=0
• If successful, you should see debug_log=0 in the status bar for a few seconds.
• Restart Everything to ensure setting is saved:
• In Everything, type in the following search and press ENTER:
  /restart

If you installed version 979 or 980 debug logging may have been enabled.